What does a 200 hr course include?

There are 40 credit Hours for permit, and 160 credit hours class for skills training, Driving, Backing, and Pretrip. Driving test will be at School. For a total of 200 credit hours.

Our trucks are 10 speed manualUnsynchronized transmissions. “Shifting/operating transmissions” is described as an introduction to “basic shifting patterns and procedures,” which will enable the trainee to perform basic shifting maneuvers, including executing up and down shifting techniques on multi-speed dual-range transmissions. Driver-trainees demonstrate proficiency in proper techniques for performing safe and fuel-efficient shifting and making any necessary adjustments in the process.

FMCSA Training Registry

RBVT is a listed Training Provider for the FMCSA (Federal Motor Carrier Safety Administration) Training Registry. Once you successfully complete your course, RBVT will submit your certification to FMCSA via the Training Provider Registry.

R&B Vocational Training llc- Class A CDL Truck Driving School
Direct CDL Trainers, and Partner with
Paris Junior College, Collin College, and Now Grayson College

Contact or Call Now

Weekday or Night / Weekend Classes

Questions About the 200 hr Course

Most companies WILL NOT HIRE YOU without BARE MINIMUM 160 HOURS of training COMPLETED.

What does a 200 hr course include?

There are 40 credit Hours for permit, and 160 credit hours class for skills training, Driving, Backing, and Pretrip. Driving test will be at School. For a total of 200 credit hours.
Manual Transmission?

Our trucks are 10 speed manualUnsynchronized transmissions. “Shifting/operating transmissions”
is described as an introduction to “basic shifting patterns and procedures,” which will enable the trainee to perform basic shifting maneuvers, including executing up and down shifting techniques on multi-speed dual-range transmissions. Driver-trainees demonstrate proficiency in proper techniques for performing safe and fuel-efficient shifting and making any necessary adjustments in the process.
Where do you take the CDL Driving Test

CDL Driving Test to get your license will be conducted at end of class at our Training Center Location. RBVT is a certified Third Party Skills Testing (TPST) provider authorized by the Texas DPS to administer the driving skills examination for Class A CDL applicants.
Endorsements

RBVT offers training for Endorsements :
(H)Hazardous Materials
(N)Tank Vehicle
(T)Double/ Triple Trailers
(X) hazardous and tank
FMCSA Training Registry

RBVT is a listed Training Provider for the FMCSA (Federal Motor Carrier Safety Administration)
Training Registry. Once you successfully complete your course, RBVT will submit your certification to FMCSA via the Training Provider Registry.

Now offering a 30hr Unrestricted Class A CDL.

Training for a Full Class A Unrestricted CDL License.
LOW COST.
Meets ELDT Requirements.
Get your CLP learners permit.
Pretrip, Backing Skills, Air Breaks, Driving instruction, and ELDT Theory.
Driving Test for License.

Semi Truck Driving School & CDL Trainers info

A Class A CDL License is needed to operate any combination of vehicles with a GVWR of 26,001 or more pounds provided the GVWR of the vehicle(s) being towed is in excess of 10,000 pounds. Vehicles requiring a Class A CDL license are primarily tractor-trailers driving long distances

Training Course Hours

8 Hr Endorsement Course (H, N, T, X)

50 Hr Permit Course*

50 Hr Driving Refresher Course w/Permit (Previous CDL holders w/experience)

160 Hr Driving Only w/Permit Course*

*Classes required to get Class A CDL

RBVT's Class A CDL Training Program provides students with the necessary skills to begin driving a truck professionally. We provide both the hands-on training and the CDL knowledge needed to properly and safely operate a truck.

CDL Driving Test to get your license will be conducted at end of class at our Training Centers.

Training will include:

Hands-on driving at our facility and on the road.

Trip planning and compliance with DOT.

Detect and identify maintenance problems on tractor-trailer units

Backing, turning and coupling/uncoupling.

Securing loads properly.
Permit Class to obtain learners permit
Endorsement Class for Hazmat, Tank, Double/Triples, Hazardous and Tank

RBVT is a CDL Training School in Texas with multiple Training Centers

RBVT partners with Paris Junior College, Collin College and now Grayson College for Professional Truck Driving / CDL.

RBVT offers complete training and testing to get your class A CDL License with no restrictions.

RBVT is a certified Third Party Skills Testing (TPST) provider authorized by the Texas DPS to administer the driving skills examination for Class A CDL applicants.

RBVT offers training to obtain a Texas Commercial Learners Permit (TX CLP).

RBVT offers Skills Training : Pre-Trip, Backing Skills, and Driving Skills.

RBVT offers training for Endorsements : (H)Hazardous Materials, (N)Tank Vehicle, (T)Double/ Triple Trailers.

(X) hazardous and tank

** Does not include (P,S) Passenger/Bus Endorsement.

RBVT has a simple Loan Program in place that allows students to start paying the loan back 60 days after completion. The loan then is paid back over 3 years (depending on credit)

CDL Skills Locations

Greenville Corp Office/Training Center

3157 State Highway 34 S

Greenville, TX 75402

Greenville, TX

3157 State Highway 34 S

Greenville, TX 75402

Paris, TX Training Center

500 Clarksville St.

#242

Paris, Texas 75460

Sulphur Springs, TX PJC Training Center

1137 Loop 301 East

Sulphur Springs, Texas 75483

Farmersville, TX Collin College Training Center

501 S. Collin Parkway,

Farmersville, TX 75442

Denison, TX Grayson College Training Center

9700 Grayson Dr.

Denison, TX 75020

Plano, TX Collin College

4800 Preston Park Blvd

Plano, TX 75093

McKinney, TX Collin College

2200 W University Dr,

McKinney, TX 75069

Frisco, TX Collin College

9700 Wade Blvd.

Frisco, TX 75035

Allen, TX Collin College

2550 Bending Branch Way

Allen, TX 75013

Rockwall, TX Collin College

2301 John King Blvd

Rockwall, TX 75032

Commerce, TX PJC

2200 Campbell St

Commerce, TX 75428

Celina, TX Collin College

2505 Kinship Pkwy

Celina, TX 75009

Wylie, TX Collin College

391 Country Club Rd.

Wylie, TX 75098

Financing and Funding:

*New Student Loan Program
Veterans Scholarships
Workforce Solutions Funding
Community Service Funding
Contact us to find out more.

RBVT is a listed Training Provider for the FMCSA (Federal Motor Carrier Safety Administration)

Training Registry.

New Federal rule for entry-level CDL training goes into effect on February 7th 2022.

What is Entry-Level Driver Training?

The ELDT (Entry-Level Driver Training) regulations set the minimum Federal requirements for training that entry-level drivers must complete before being permitted to take certain CDL skills or knowledge tests.

Learn more about ELDT

Who needs to take entry-level driver training? Watch this short video to learn more about the ELDT regulations and which drivers are subject.

What do CDL applicants need to do?

Verify Applicability

Confirm that you are subject to the ELDT requirements.

Verify

Complete Training

Once you successfully complete your course, R&B Vocational Training llc will submit your certification to FMCSA via the Training Provider Registry.

Check Your Training Record

Frequently Asked Questions

Browse or search the frequently asked questions for more information on the Training Provider Registry or the ELDT regulations.

Read the FAQs

Colleges
RBVT is partnered with

Enrollment and Information

Students can contact one of the colleges or RBVT directly.

Paris Junior College

Students will receive 50 hours of classroom and lab instruction designed to provide the student with information necessary to obtain the requirements for a Class A Learners Permit. Topics include (but not limited to): Special Requirements, Air Brakes, General Knowledge, Human Trafficking and Combination Vehicle.

Collin College

Students must register for both CDL I and II (200 hours) Prepares student for mastery of the Commercial Drivers License written examination. CDL II is a continuation of CDL I and provides general truck driving skills with hands-on component, and instruction coordinated with the Department of Transportation.

Grayson College

Class In this extensive hands-on course, you will practice basic and advanced skill drills and safe operating practices; basic shifting and backing skills; general truck driving with hands-on competency development and instruction coordinated with the Department of Transportation.

Write your caption here
Slide title

Write your caption here

Button
Slide title

Write your caption here

Button

Companies who offer tuition reimbursement:

McElroy
Werner

Paschall Truck Lines (PTL)

Schneider National

Stevens Transport

NFI Transportation

Services Offered:

Class A CDL Training Programs

OSHA Training.

Flexible Classes (Days.)

Weekly Classes.

Tuition Assistance Available (For those that qualify.)

Job Placement Assistance

R & B Vocational Training provides OSHA training classes at your site.

We have highly qualified OSHA-authorized outreach trainers conduct OSHA 10-hour training classes, and the OSHA 30-hour training classes.

R&B also has confined space training, competent person training, and fall protection training at your site.

OSHA FAQs

R&B will help ensure the success of every student while building a reputation that will provide opportunities for graduates of R&B Programs. By building relationships in the community R&B will help graduates find jobs, both locally and nationally.